Belt Drive Kit

Belt Drive Kit
Belt Drive Kit

Technical Description of Belt Drive Kit
When properly designed, manufactured, and correctly set; belt drives are low-maintenance, low-noise, long-life drive units. It is important that the belt should not vibrate and/or slip. The accessory set-up can be used to investigate conditions that cause vibration or slip. The effect of disparate elongation on multiple belt drives can be demonstrated by means of individually-adjustable tensioning rollers. The belt drive is a dual belt drive with a belt tensioner. It can, however, also be operated with only one belt.  An eccentrically-bored small belt pulley and a damaged V-belt enhance the range of possible experiments. The brake and load unit is required to conduct the experiment. The accessory set can also be used to apply transverse loads in other experiments.

Specification of Belt Drive Kit
    Investigation of the vibrations of belt drives
    Dual belt drive with V-belt
    Belt drive can be operated with one belt
    Individually-adjustable tensioning rollers
    Belt drive with eccentricity
    Damaged V-belt
    Belt pre-tension measuring device 0...150N
    Suitable for applying transverse loads on other systems within the accessory sets of the series
    Stackable box for all components

Technical Data of Belt Drive Kit
V-belt pulleys
    Large: D=125mm
    Small: D=63mm
    Small, eccentric: D=63mm
    Axle centres: 300mm

V-belt
    SPZ, approx. 10mm wide
    Belt length: 912mm
Dimensions and Weight of Belt Drive Kit
    l x w x h: 600x400x170mm (box)
    Weight: approx. 6kg