Device For Cupping Experiments

Device For Cupping Experiments .
Device for Cupping Experiments for Science Lab Equipment Laboratory Instruments Manufacturers, Engineering Lab Equipments Manufacturers

Technical Description of Device for Cupping Experiments

This supplement to the universal material tester enables deep-drawing and cupping experiments to be performed to assess the material properties of thin sheet. The deep-drawing conditions are similar to those used in practice. A sheet specimen is clamped between the die and the holder. The specimen is then deformed using a spherical punch until it cracks. A mirror permits the underside of the specimen to be observed and thus makes it possible to see exactly how cracking starts. Using these device thin sheets up to thickness of 2mm can be investigated.

Specification of Device for Cupping Experiments

    Deep-drawing experiment for assessing the quality of thin sheet as a supplement to the universal material tester
    Sheet specimen thickness max. 2mm
    Specimen mat. steel, aluminium, copper, brass
    Spherical drawing punch, diameter 20mm
    Die diameter 27mm
    Mirror for the observation of the underside of the specimen
Technical Data of Device for Cupping Experiments
    Specimen
    Material: steel, aluminium, brass, copper
    Dimensions: 60x60mm, thickness max. 2mm
    Drawing punch: sphere 20mm
    Die diameter: 27mm