ELECTRICAL SMART TRAINER

ELECTRICAL SMART TRAINER .
Specification

a)    Signal Input

i)    Oscilloscope
•    Impedance: 1 MΩ / 20 pF
•    Minimum voltage: ± 50Vp-p
•    Band width: 4 MHz
•    ADC Resolution:> 10 bit
•    Voltage DIV: ± 10V / 5V / 2V /1V /0.5V / 0.2V / 0.1V / 50mV / 20mV
•    Time DIV: 22 times 1 us – 10 s
•    Trigger: Auto, single, stop mode
•    Memory: Host streaming

ii)    Voltage and Ammeter
•    Measuring function: DC/AC Volt, Ampere, Power
•    Meter function: Average, peak, peak-peak, RMS value
•    Range: Auto and manual mode (> 9 step, 100 mV-50 V)

b)    Signal Output
i)    Function/Pulse/Arbitrary Waveform Generator
•    Output Impedance: 50 Ω / 200 mA
•    Amplitude: ± 100 mVpp, ± 10 Vpp, maximum 20 Vpp
•    Frequency: 0.1 Hz – 1 MHz
•    Range: 0.1 Hz/ 1 Hz/ 10 Hz/ 100 Hz/ 1 kHz/ 10 kHz/ 100 kHz, 7 step
•    Output Waveform: Sine, square, triangle, logic, DC pos (+), DC neg (-)
ii)    DC Source Output
•    Range: 100 mV, 1 V, 10 V
•    Volt Source: ± 0 – 10 V high definition

c)    Digital Input (Digital Analyzer/Counter)
•    Channel: 16
•    Input Voltage Function: TTL/CMOS
•    Maximum Voltage: 20 Sampling
•    Frequency: 100 kHz
•    Triggering: Low, High, DC
•    Memory: Host streaming
•    Function: BIN (2 bit), oct (8 bit), DEC (10 bit), HEX (16 bit), (BIT: 8 or 16 bit)

d)    Digital Output (Signal Generator/Timer)
•    Channel: 16
•    Output Voltage Form: TTL/CMOS
•    Output Current: 3 mA
•    Maximum Voltage: ± 15 V
•    Function: BIN (2 bit), oct (8 bit), DEC (10 bit), HEX (16 bit), (BIT: 8 or 16 bit)
•    Output Frequency: 100 kHz
•    Memory: Host streaming

e)    Relay Output
•    8 Relay: COM, NO, NC (1A/ 24 VDC)

f)    Variable Power Supply

i)    3 Channel DC Power Supply
•    V1 Voltage: DC 0 - ± 20V 2A
•    V2 Voltage: DC 0 - ± 20V 2A
•    V3 Voltage: DC 0 - ± 20V 2A
ii)    3 Channel AC Power Supply
•    AC Voltage: AC 14 vRMS / 2A (Resolution: 0.1V)
•    Frequency: 1 Hz – 150 Hz (Resolution: 0.1V)
iii)    Advance 3 Phase AC Power Supply
•    Function: Sine, V sine, V lock, Pulse
•    V1 Voltage: AC 0 – 100%
•    V2 Voltage: AC 0 – 100%
•    V2, V3 Phase Shift:  0 – 359 Deg
•    Clock Frequency: 10 kHz – 320 kHz
•    V3 Voltage: AC 0 – 100%

g)    Digital Multimeter
•    Voltage: DC 1V/ 10V/ 100V/ Auto
AC 200 mV/ 2V/ 20Vrms, 40Hz – 20 kHz
•    Current: DC 2V, AC 500 mA, 2 Arms, 40 Hz – 20 kHz
•    Resistance: 100Ω/ 1 kΩ/ 10 kΩ/ 100 kΩ/ 1 MΩ/ 10 MΩ/ Auto
•    Capitance: 10 nF/ 100 nF/ 1µF/ 10µF/ 100µF/ Auto
•    Diod: 1 V/ 10 V

h)    Power Supply
•    Fix Voltage: +3.3 V/1A, +5 V/1A, ± 15 V/500 mA, Common

•    User manual
•    Technical manual
•    Operating manual