Experimental Module Pin On Disc

Experimental Module Pin On Disc .
Experimental Module Pin on Disc
Technical Description of Experimental Module Pin on Disc   
Using the experimental module, friction forces between a vertical pin and rotating disc can be investigated. The unit is intended for use with the basic module. The end of each pin specimen made of steel, aluminium or brass rubs against the rotating, hardened, ground steel disc. The contact pressure between the components can be varied using a lever with weights. The friction force is measured using a strain gauge force transducer in the bearing point of the loading mechanism. The disc is enclosed in an open container that can be filled with different lubricants for the experiments.
Specification of Experimental Module Pin on Disc
    Benchttop exp. module for the investigation of wear on pairs of friction materials with surface contact
    Operation in conjunction with module
    Stainless steel friction disc, hardened and ground
    Adjustable operating speed
    Pin material steel, aluminium, brass
    Friction pin diameter 4mm
    Friction force measuring using full bridge strain gauge

Technical Data of Experimental Module Pin on Disc
    Friction disc: stainless steel, hardened, ground
    Operating speed: 0...0.42m/s
    Friction pin diameter: 4mm
    Load: 0...80N
    Friction force measuring range: 0...50N
Dimensions and Weight of Experimental Module Pin on Disc
    l x w x h : 350 x 440 x 230 mm
    Weight: approx. 8 kg