I And C Software Controller

I And C Software Controller .

I And C Software Controller

Technical Description of I And C Software Controller

The software ideally supports the experimentation and learning process of demonstration models. Its key features are the software controller and the recorder function. The controller can operate as a configurable PID controller and as a 2-point controller. In the latter case, as well as the setting of the reference variable, the hysteresis can also be pre-set. The recorder function provides continuous recording of controlled, manipulating and reference variables. It plots responses to changes in the reference (e.g. step input) and disturbance variables. Measured values can be printed out and saved to data media. Connection to a PC is by a USB port. The supplied USB interface module provides an adequate number of analogue inputs and outputs, enabling even complex circuits, such as a cascade to be controlled. The controller included with each demonstration unit can also be used instead of the software controller. In this case, controlled, manipulating and reference variables can be plotted, displayed and saved by the program's recorder function.

Specification of I And C Software Controller

• Instrumentation and control software to present relevant data on a PC
• Selectable continuous or switching software controller mode
• Continuous controller parameters settable
• The controller included in the demonstration model can be replaced by a software controller
• The controller included in the demonstration model can also be used with the software recorder function
• Real-time data can be displayed in different windows
• Language freely selectable
• Easy connection to PC via USB port with 4 analogue inputs and 2 analogue outputs

Technical Data of I And C Software Controller

Software controller (continuous mode)

• Configurable as P, PI or PID controller
• Cascade control

Software controller (switching mode)

• 2-point response
• Input of reference variable and hysteresis

Recorder function with data saving

• Recording and saving of time functions
• Evaluation of step responses with automatically
• Generated inflectional tangent

Language selection

• 4 pre-selectable languages
• 1 user-defined language possible

Software basis

• LabVIEW
• System requirements: Windows XP or Windows
• Vista, USB port