INDUSTRIAL PLC PROGRAMMING TRAINING SYSTEM

INDUSTRIAL PLC PROGRAMMING TRAINING SYSTEM
A.    Programmable Logic Controller:
i.    CPU 1516 – 3 PN/DP
ii.    Central Processing unit with working memory 1MB for program and 5MB for data.
iii.    Interface:
a.    PROFINET IRT with 2 Port Switch
b.    Ethernet
c.    PROFIBUS – 10Ns Bit-Performance
iv.    Memory Card is necessary

B.    Digital Input Module:

i.    DI 32xDC 24V HF
ii.    32 Channels in groups of 16
iii.    Input delay 0.05ms to 20 ms
iv.    Input type 3 (IEC 61131)
v.    Diagnosis
vi.    Process Alarms

C.    Digital Output Module:

i.    DQ 32xDC 24VDC/0.5A
ii.    32 Channels in groups of 8, 4A per group
iii.    Diagnosis
iv.    Substitute Value

D.    Analog Input Module:
i.    AI 8xU/I HS, 16 Bits of Resolution, Accuracy 0.3%
ii.    8 Channels in groups of 8
iii.    Common mode voltage appropriate 10V
iv.    Diagnosis
v.    Process Alarms
vi.    8 Channels in 0.0625ms including in feed element, shield clamp and shield terminal

E.    Analog Output Module:

i.    AQ 4xU/I ST
ii.    16 Bits of resolution, accuracy 0.3%
iii.    4 Channels in groups of 4
iv.    Diagnosis, substitute value including in feed element, shield clamp and shield terminal

F.    Required Accessories:
i.    Memory card for PLC CPU, 3.3V Flash, 24Mbyte
ii.    Front connector screw-type, 40 pins, for 35mm wide modules including 4 jumpers and cable strap
iii.    Industrial Ethernet TP cord RJ45/RJ45, CAT 6A, TP cable 4x2, preassembled with 2 RJ45 connectors, Length = 6m
iv.    Mounting rail 482mm (appropriate 19in) including grounding element, integrated DIN rail for mounting of small components such as clamps, fuses or relays
v.    24V/8A stabilized power supply for PLC CPU
a.    Input: 120/230V AC
b.    Output: 24V/8A DC
vi.    PLC Programming software, floating license
a.    Engineering software in TIA Portal
b.    License key on USB-Stick
c.    Class A
d.    6 Languages: GE, EN, IT, FR, SP, CN
e.    Executable under Windows 7 (32Bit, 64Bit), Windows 8.1 (64Bit)
vii.    Base for PLC comes with:
a.    32 switch for DI
b.    32 socket for DI
c.    32 LED for DO
d.    32 socket for DO
viii.    Personal Computer with minimum specifications or higher as below :
a.    Powered by 6th Generation Intel Core i7
b.    Windows 7/Windows 8.1
c.    8GB Dual Channel DDR4 2133MHz (4GBx2)
d.    256GB SSD
e.    2TB 7200rpm hard disk drive
f.    NVidia GeForce GTX745 with 4GB DDR3
g.    24” monitor
h.    Tray load DVD Drive (Reads and Writes to DVD/CD)
i.    Ports: