Inertia In Rotational Motion Apparatus

Inertia In Rotational Motion Apparatus

Technical description of Inertia In Rotational Motion Apparatus

This apparatus enables experiments to be performed on rotational motion in general. Weights can be fitted to a rotating rod at marked distances from the centre. A dumbbell-shaped arrangement is thus created; the inertia properties of this arrangement can be changed easily and recalculated. The arrangement is fitted to a low friction ball bearing mounted rotating drum. The system is accelerated by a metal weight attached to a cord wrapped around the drum. The time taken for the weight to fall is measured using a stopwatch, the moment of inertia of the object can then be determined. The experiment is set up quickly using table clamps and stands; it is ideally suited to group work for 2-3 persons.

Specification of Inertia In Rotational Motion Apparatus

• Student experiments on moments of inertia, comparison of the inertia of rotation of various bodies
• Metal rotating bar, weights with knurled bolts for quick fastening
• Solid and hollow test cylinders
• Ball bearing mounted rotating drum, anodised aluminium
• Acceleration of system by weight attached to the drum

Technical data of Inertia In Rotational Motion Apparatus

• Rotating rod: 550mm long, d=10mm
• Weights: 100g, 200g, 400g

Solid cylinder

• Diameter: d=120mm
• Mass: 900g

Hollow cylinder

• Outer diameter: d=120mm
• Inner diameter: d=110mm
• Mass: 0.9kg
• Weight for the drive: 1n

Dimensions and weight of inertia in rotational motion apparatus

• L x w x h : approx. 600 x 200 x 400 mm (set-up)
• Weight : approx. 9 kg