Lead Free 100W Soldering Station

We have gained immense expertise in delivering an unmatched range of Soldering Station Lead Free 100W. The offered range of soldering station lead free 100w is developed utilizing optimum grade raw material and latest techniques in complete tandem with the industry laid norms and standards. Additionally, the offered range of soldering station lead free 100w is checked on different parameters to ensure its adherence with the industry laid norms and standards.

Features:

• Accurate and advanced temperature, control with micro controller technology
• Set / read of operation
• Separate of increase & decrease of temperature, after two seconds the actual read of Temperature will display
• Intelligent power management auto stand by mains interruption to save power
• Temperature control accuracy ± 1°C
• If sensor fails, power to the element shut off
• The unit designed for digitally calibration through advanced software
• Burn proof silicon cable thermal resistance up to 600° C
• Power full DC pump with 4000 RPM
• Clear LCD display
• Nine simultaneously operations, all nine ops independent
• Completely indigenously developed
• The mini lab features in a tabletop unit

System includes:

• Soldering station: 24 V / 60 W
• De-soldering stations: 24 V / 70 W
• Thermal wire stripper
• DC power supplies: 1.5 V to 18 V DC
• SMD hot air (with built in vacuum pick up)
• SMT hot tweezer (2 x 25 W)
• Electric screw driver
• Machine center (micro drilling, milling,)
• Auto range multimeter

Soldering and de-soldering irons:

• Input voltage: 190 V to 27 V
• Output voltage: 24 V AC
• Soldering element: 60 W
• De-soldering element: 70 W
• Temp range: 180-480 degree celcius
• Temp accuracy: ± 1 degree celcius
• Tip to ground potential: Under 2 MV
• Tip to ground leakage: Under 2 E
• Vacuum: 600 mm/Hg
• High quality 24 V DC pump with 4000 RPM

SMD hot air:

• Input voltage : 220 V AC
• Power consumption: 300 W
• Air pump: Diaphragm type
• Capacity: 24 L / min
• Hot air temperature: 200 to 550 Deg. C
• SMT tweezer: 2 x 25 W
• Thermal wire stripper: 1.5V /1 Amps
• Quick heat Up: With in 2 seconds
• Stepless increase of temperature
• (Soft PVC to tough PTFE / teflon)
• Electric screw driver
• Machine center
• DC power supplies: 1.5V - 15V DC /1Amps
• Auto range multimeter