Mass Oscillations And Hammer Study Unit

Mass Oscillations And Hammer Study Unit .

Mass Oscillations And Hammer Study Unit

In the hydraulic systems the flow variations produce two phenomena: the mass oscillation and the water hammer which are related each other but have different characteristics.

Characteristics of Mass Oscillations And Hammer Study Unit

• The Mass Oscillations And Hammer Study Unit is provided with a constant level container connected to the water supply by means of a pipe.
• The oscillation test section is made of stainless steel 3 m long provided with the valves necessary for the flow control and with two pressure measurement devices, the electric signal of which is sent to a double trace memory oscilloscope which allows to examine, in all the phases, the phenomena of mass oscillation.
• For the water hammer test, the unit is provided with a quick closing valve with manual control in order to obtain an immediate flow interruption.

The Mass Oscillations And Hammer Study Unit is available in two different solutions:

Experiments of Mass Oscillations And Hammer Study Unit

• Mass oscillation demonstration
• Visualization of oscillation characteristics in the balance pipe
• Demonstration of the losses in the reservoir and in the balance tank
• Water hammer demonstration
• Determination of the transient pressure curve of a water hammer by means of an oscilloscope

Required services of Mass Oscillations And Hammer Study Unit 

• Electric supply: 220 V, 50Hz ; 1 kW.

Weight and dimensions of Mass Oscillations And Hammer Study Unit

• Dimensions: 3000 x 730 x 2500 h mm
• Net weight: 70 kg approx.