Single Effect Falling Film Evaporation Pilot Plant

Single Effect Falling Film Evaporation Pilot Plant .

Manual Single Effect Falling Film Evaporation Pilot Plant

• Metering pump with a flow rate of 0 to 24 liters per hour.
• Feed tank with a capacity of 25 liters
• Tank with a capacity of 10 liters for collecting the concentrated product
• Tank with a capacity of 10 liters for collecting the condensed solvent
• Steam trap
• Graduated tank with a capacity of 1 liter for measuring the condensate
• Bourdon pressure gauge with a capacity of 0 to 6 bar
• Bourdon pressure gauge with a capacity of 0 to 1.6 bar
• Bourdon vacuum gauge with a capacity of –1 to 0
• Metering pump with flow rate of 0 to 8.5 liters per hour
• Falling film shell-and-tube evaporator with an exchange surface of 0.27 m²
• Shell-and-tube condenser with an exchange surface of 1.1 m²
• Tube-in-tube heat exchanger.
• Pneumatic valve for control of the steam flow rate, Cv=0.32
• Calibrated diaphragm with differential pressure transmitter for measuring the steam flow rate
• 6x digital thermocouples with pt100 probes protected by stainless steel shield sleeves
• 6x electronic temperature indicators