Solar And Heat Source Vapour Turbine

The Solar And Heat Source Vapour Turbine consists of a coiled copper tube through which pressurised solvent flows. The coil is immersed in an insulated tank containing hot water provided by either an electric resistance heater which is housed within the tank, or by the optional solar energy collector mounted in a suitable position outside.

Experimental Capabilies of Solar And Heat Source Vapour Turbine

Clear and easily observed demonstration of a classic Rankine Cycle. Production of Torque/Speed and Power/Speed curves for a single stage impulse turbine. Use of property charts or tables and the application of the First Law of Thermodynamics to produce energy balance. Determination of thermal efficiency at a range of turbine inlet and exhaust pressures. Comparison of performance with the Rankine Cycle Estimation of total frictional losses in turbines. In addition, With Optional Solar Panel Demonstration of the production of shaft work from solar radiation. Measurement of solar energy collection at a range of mean water temperatures

Specification of Solar And Heat Source Vapour Turbine

1. Panel:  High quality reinforced plastic panel on which all components are mounted.
2. Vapour Generator:  Copper generating coil in water filled stainless steel tank fitted with thermostatically controlled *1.5W heater.
3. Turbine:  Single stage impulse turbine  typical output approximately *20W at 15,000 rev. min-1.
4. Condenser:  Water cooled coil housed in glass walled cylindrical chamber.
5. Feed Pump:  Positive displacement pump.
6. Circulating Pump:  To circulate water through vapour generator tank and solar panels