ULTRASONIC FLAW DETECTOR

ULTRASONIC FLAW DETECTOR
Complete set of ultrasonic flaw detector for education, technical training and rugged daily use. Able to detect flaws in small and large parts, to indicate the internal defect, measure thickness, testing welds, forged parts ferrous and non-ferrous, metallic and non-metallic.

Features:
1.    Frequency range :0.5 Mhz to 10 Mhz
2.    Test range : 0-10 mm (min.), 0-1m (max.)
3.    Coarse switch: 10mm/ 50mm/ 250mm/ 1000mm.
4.    Fine control : factor 1 A 10
5.    Total Gain: 100 D.
6.    Suppression (reject) : continuously adjustable from 0 to approx. 40 % of CRT screen height w/led warning light.
7.    CRT display about 70 x 50 mm or bigger.
8.    Pulse shift: 0-250 mm steel.
9.    Pulse strength: switchable from medium power to high power.
10.    Monitor: Built-in single channel gate with yes/no coincidence output; internally adjustable to anti-coincidence.
11.    Monitor gate : gate width adjustable from 10 to  90 % of the scale width
12.    240 V / 50 Hz / 1 ph.

Additional Items :
1.    Monitor gate.
2.    Calibrated fine gain.
3.    0.5 DB STPS.
4.    Selectable pulse power.
5.    Carrying strap.
6.    Protective screen overlay.
7.    Protective cover.
8.    Certificate of calibration.
9.    Instrument carrying case with shoulder strap.
10.    Standard accessories :
a.    1 unit direct contact straight-beam probe, 0.5 MHz, 34 mm.
b.    1 unit direct contact straight-beam probe, 1 MHz, 34 mm.
c.    1 unit direct contact straight-beam probe, 2 MHz, 24 mm.
d.    1 unit direct contact straight-beam probe, 4 MHz, 24 mm.
e.    4 units straight-beam, probe cable, length 2 m min.
f.    1 unit direct contact angle beam probe, 2 MHz,    45 Degrees.
g.    1 unit direct contact angle beam probe, 2 MHz,     60 Degrees.
h.    1 unit direct contact angular beam probe, 2 MHz, 70 Degrees.
i.    1 unit miniature angle beam probe, 4 MHz,          45 Degrees.
j.    1 unit miniature angle beam probe 4 MHz,           60 Degrees.
k.    1 unit miniature angular beam probe, 4 MHz,       70 Degrees.
l.    3 units cable for angular beam probe, length 2 m min.
m.    3 units cable for angular beam miniature probe. 1 set standards calibration.

n.    1 set standards calibration, miniature probe.
o.    1 set standards blocks, thickness measurement.
p.    2 sets of 6, Ni-Cad batteries.
q.    1 set battery charger;
r.    Straight-beam probe degree scale:1 unit frequency 2 MHz and 1 unit frequency 4 MHz
s.    Angle beam probe degree scales;1 unit 2 MHz and 1 unit 4 MHz
t.    Transportation case
u.    Spare fuses (10 nos.)
1.                
a.    User manual      
b.    Technical manual  
c.    Operating Manual
Electrical drawing  (if any)