Axial Flow Turbine Engine

Axial Flow Turbine Engine
Specification of Axial Flow Turbine Engine for Science Lab Equipment Laboratory Instruments Manufacturers, Engineering Lab Equipments Manufacturers
An aeronautical axial flow gas turbine engine mounted on a stainless steel plinth, suitable for bench mounting.
An optional mounting frame is available for floor-standing operation.
The engine has a maximum speed in excess of 100,000 rpm and generates a thrust of at least 195N.
Full instrumentation to measure rpm, thrust, temperature and pressure at each stage of the jet engine
Stainless Steel air inlet duct to measure air flow.
The engine is easy to start, without the need for propane gas or compressed air.
The equipment is fully controlled from a user supplied PC. The software includes powerful educational features together with sophisticated graph plotting and data logging capability.
Description of Axial Flow Turbine Engine
The engine has been integrated into a sturdy metal frame that holds it firmly, whilst enabling accurate measurement of the thrust produced by the engine.
The engine inlet has been replaced with a custom fabricated frontal duct, to enable the air mass flow rate to be accurately measured.
An electronic pre-programmed controller constantly supervises the engine, ensuring safe operating conditions at all times.
The engine is controlled via the software, which provides users with a friendly graphical interface for real-time monitoring and operation. This software controls the engine speed, which is electronically controlled using a high precision fuel gear pump. This method gives a very fast engine response.
The engine is very easy to start and stop from the software interface and automatic, optimal start-up and power-down sequences are already set to assure minimum mechanical stresses. There is no requirement for compressed air supply or propane gas to start the engine