Adsorptive Air Drying

Adsorptive Air Drying

Adsorptive Air Drying

Specification Of Adsorptive Air Drying

• Continuous adsorptive air drying
• 2 columns for alternating charging and regeneration of the adsorbent
• Observation of mass transfer zone by using transparent columns and adsorbent with indicator
• 2 compressors to deliver the feed air and regenerative air out of the ambient atmosphere
• Humidification of the feed air by flowing through a water bath
• Circular system with pump and refrigeration system to adjust the water bath temperature
• Adjustment of relative humidity and temperature of feed air by heater
• Heater for temperature adjustment of the regenerative air
• Adjustment of regenerative air and feed air flow rates by valves

Technical Data

2 columns

• Diameter: approx. 80mm
• Height: approx. 800mm

2 compressors

• Max. Positive pressure: 1bar
• Max. flow rate: 8m³/h

Humidifier pump

• Max. Flow rate: 600l/h
• Max. head: 1,5m

Refrigeration system

• Refrigerating capacity: 395W at temperature
• Difference 10K / 250L

2 electric air heaters

• Power output (feed air): 160W
• Power output (regeneration): 2x 250W

Measuring ranges

• Flow rate: 2x 0...10nm³/h
• Air temperature: 3x 0...50°c; 1x 0...200°c,
• 1x -25...125°c
• Air humidity: 4x 0...100% rel.
• Water temperature: 1x 0...50°C